Description
SDN8601GR1B V2 1 GE G/EPON Dual Mode ONU Description:
The SDN8601GR1B-V2 is ITU-T G.984.x based or IEEE802.3ah based dual mode ONU that supports 2.5G downstream and 1.25G upstream bandwidth for GPON, supports 1.25G downstream and 1.25G upstream bandwidth for EPON.
It supports dual mode (EPON and GPON), can access EPON/GPON OLTs. It also comes with 1*10/100/1000Base-Tx Gigabit Ethernet LAN port that supports 1Gbps downstream bandwidth.
Main Features:
- Comes with 1G/EPON WAN Port, support 1.25G upstream and 2.5G/1.25G downstream
- Built with the well-round Realtek chipset, low cost and high performances
- Support Rich layer 2 Management features, applicable to the biggest ISP networks
- Built based on WDM, transmitting Data/IPTV/Voice over a Single fiber, max transmission distance can reach 20Km
- Max 1:128 Fiber ratio for GPON, max transmission distance can reach 20km
- Max 1:64 Fiber ratio for EPON, max transmission distance can reach 20km
- Support FBA (Flexible Bandwidth Assignation), dynamic assign bandwidth automatically
- High security, data encrypted at upstream and downstream directions
- Support Multicast, end users can optionally apply for VOD, Video conferencing, etc.
- Easy installation and Maintenance, support remote failure detect and locate. Saving your maintenance cost
Technical Parameters
GPON Parameters:
- ITU-T G.984.x GPON, -30dBm BOSA inside, SC/APC or SC/UPC connectors optional
- 1310nm upstream & 1490nm downstream
- Support G.984.1 General Characteristics
- Support G.984.2 Physical Media Dependent (PMD) layer specification
- Support G.984.3 Transmission convergence layer specification
- Support G.988 OMCI protocol
- GPON transceiver transmitting power: 0.5-5dBm, receiving sensitivity: -30dBm
- Transmission wavelength: Upstream: 1310nm / Downstream: 1490nm
- Support 1:128 Fiber Ratio at 20km transmission distance.
- Fiber Transmission cable: G.652 single mode optical fiber cable
- Configurable AES decryption on downstream payload.
- Configurable FEC on both upstream and downstream payloads.
- Multi-Application Processor queues for dedicated connections for in-band.
- Enhanced GPON debug and diagnostic functions.
- Support up to 8 Transmission Container (T-Cons), 32 GEM Port IDs
- Support NSR/SR Dynamic Bandwidth Allocation (DBA)
- Support Forward Error Correction (FEC)
- Maximum 2.5 Gbps Downlink/1.25 Gbps uplink
- Support Dying Gasp
GEPON Parameters
- IEEE 802.3ah GEPON standard, support standard OAM CTC 2.1, 3.0 China Telecom GEPON standard
- Built-in with a BOSA, SC/UPC or SC/APC connector
- 1310nm wavelength at upstream & 1490nm wavelength at downstream GEPON transceiver transmitting power: 0.5-5dBm,Optical receiving sensitivity:-28dBm
- 1:64 Fiber Ratio at 20km transmission distance.
- Fiber Transmission cable: G.652 Single mode optical fiber cable Support 1 LLID (Logical Link Identifier)
- Support 1 LOID (Logical ONU Identifier) Support Triple Churning Encryption algorithm
- Support NSR/SR Dynamic Bandwidth Allocation (DBA) Support Forward Error Correction (FEC)
- 4 QoS queues & SP Dispatching Algorithm over PON
- Maximum 1.25Gbps Downlink / 1.25Gbps Uplink
- Support Dying Gasp
Hardware Features:
- Fully Compatible with ,ITU-T G.984.x , IEEE802.3ah CTC 2.1, CTC 3.0 standard
- Offers 1*G/EPON SC Port, 2.5G / 1.25G Downstream, 1.25G Upstream
- Sensibility of Gepon Optical port: -2dBm to -27dBm
- Support 2Gbps Backplane bandwidth
- live LED Indicators for Power, PON, LOS and LAN
- Desktop design, Plastic housing,
- Plug and Play operation
- External Power Supply
- Power Supply, AC 110V-240V input, DC 12V, 0.5A output, 4KV surge protection
- Support Asia, Europe, U.S, U.K, AU standard power plugs
Software Features:
- Support IEEE802.1Q VLAN, Port Based VLAN
- Support IEEE802.1P QoS, Tos, Cos
- Support IEEE802.1d Spanning Tree
- Support IEEE802.1W Rapid Spanning Tree
- Support MAC address translation and MAC addresses limitation
- Support IGMP V1, V2 and IGMP Snooping for multicast
- Support IEEE802.3X full duplex, half duplex backpressure flow control
- Support MAC, IP, or TCP/UDP protocol based ACLs (Access Control protocol)
- Support Bandwidth Control
- Support CLI management, SNMP based NMS management and Monitor
- Support TR069 ACS management
- Support 4k VLAN
- Support MAC Learning, 1k MAC address table
Specification Table
Standards | IEEE 802.3,IEEE 802.3u, IEEE802.3ab, IEEE802.3ah,IEEE 802.3x, IEEE802.1Q, IEEE802.1P, IEEE802.1D, IEEE802.11b/g/n, ITU-T G.984.1, ITU-T G.984.2, ITU-T G.984.3, ITU-T G.984.4 | ||
Topology | Star Topology | ||
Uplink Port | 1 G/EPON SC port | ||
Downlink Ports | 1* 10/100/1000Base-Tx Gigabit LAN Port | ||
Transmission Rate | 2.5G / 1.25G Downstream, 1.25G Upstream | ||
Transmission Distance | Maximum 20Km | ||
LED Indicators | Power, PON, LOS, GE | ||
Ethernet Cable | 10Base-Tx: UTP category 3, 4,5, up to 100m | ||
100Base-Tx: UTP category 5, up to 100m | |||
1000Base-Tx: UTP category 5, 5E, 6, up to 100m | |||
Fiber Cable | 8.3μm, 8.7μm, 9μm and 10μm single mode fiber cable | ||
Product Measurement | 9.2*7.5*2.7 cm | ||
Packaging Box Size | 10*13.8*7 cm | ||
Power Supply | AC 110-240V, DC 12V, 0.5A, External Power Supply, 4KV Surge protection | ||
Temperature & Humidity | Temperature | Humidity | |
Working | 0℃ – 45℃ | 10% – 90% | |
Standby | -30℃ – 60℃ | 5% – 90% RH |
Reviews
There are no reviews yet.